Before you start installing or replacing your ProDot toner cartridge you must take some precautions to avoid health hazards.
Do not touch inside body of the printer where
cartridge is inserted. Do not place your hands directly into the printer while
replacing the cartridge. Internal parts of the printers would be really hot. Do
not touch electrodes if you do, you are damaging the printer, just be careful.
Below is the procedure described on how to replace ProDot toner cartridge.
First, open the front cover of the printer where
your hand can reach to existing cartridge then slowly pull the drum unit and
lift it up and remove it. You can pull it out just by holding lever on the left
side of printer. Make sure you are holding the printer with other hand while
removing the drum.
After removing the drum, place it on a piece of
paper or smooth cloth to avoid spilling. If toner scatters on your hands wash
it right away it is advised that you be careful let know toner gets into your
hands or any other body part.
Dispose this toner cartridge as per local
regulations. Dispose it off by keeping it in bag sealed. Now take out new toner
cartridge from sealed pack. Do not let your new toner cartridge left unpacked for
long time, toner life may shorten.
Buy original ProDot made replacement cartridge. If
you Use Compatible toner cartridge of ProDot it will give extra life of your
printer.
Comments
Post a Comment